Category Archives: Home Services

Do-It-Yourself Loft Conversion… Here’s How!

Doing a loft conversion all by yourself can be challenging, but a very interesting experience at the same time. So we’ve put together a comprehensive guide on how to do it.

Start by doing the layout of your room. So we put the OSBI slab with a small margin, a little more than tagging. Then tighten around the perimeter of 100 mm or 75 guide profile, which will enter the rack profile support.

No drawing, it is seen that one side of the room is lower than the other. This time set. From it will largely depend on the bedroom area future. This low wall is better to put a sofa, chair, radiator, so that in future no rest head against the ceiling.

Then install the ceiling profile jumper to drywall. Do not forget to mount the mounting frame openings for windows and doors. Before mounting the ceiling profile, a forward on the part of its roof fix tepofol foil and insulation between the roof beams. Then come to this part of the inside of your ceiling is not possible.

After the frame mounting advise to sheathe the humidity inside OSBI resistant. Attach the sheets to be self-tapping screws directly to the metal sheets on the walls and ceiling.

A1_W_WRK_INT_LOFT_PRAHA_EVROPSKA_F_FINAL_01

Later, these lists will be the basis to strengthen them of attic insulation and attach to them the same material you want to furnish your space.

Start carefully isolate the room. This is a very important part of the work, which depends on how comfortable will continue to stay in this room. The best you insulate the attic room, so will kofortno temperature in your room. I note that Minplita, for example, PAROC concern, very easy to secure the sheets to the OSBI already established from your attic.

I advise you to take the thicker plate. Thick plates 50-150 cm, it is absolutely fireproof. After the insulation installation involves the fourth start of frustrated attic on both sides tepofolom.

Places joints better seal with tape to ensure tightness. Foil tends to reflect both the cold air in winter and hot – in the summer. It will also help maintain a constant temperature in the room. Radiators should of course also install if you stay in the room all year.

After the complete installation of floor plates and OSBI frame you can start decorating. Before you need to do the wiring, respecting all safety rules against fire. Mount MDF or wood. The lower wall of the sofa I sewed rail alder, and the rest, the MDF oblitsevat room. You can apply and drywall, but then have to spend more and paint, putty, paint or wallpaper.

Then set the opening of the finished door, the window, the floor was linoleum or laminate. Do not forget to install the baseboards, trims, and lighting. Another thing I would advise following the MDF layer finishing and wooden rail, if the PF usual lacquer. This prevents the material from dirt and other damage, and easier for you to clean the room.

Your room will be very easy. It would not create an additional burden for walls and slabs. The installation of such areas is very fast and to perform such work need not be a great professional. Given that the room is not the construction of capital, should have no problem with it document.

Here’s a short video from Bristol Loft Conversions

I also like to add an important point. Sloping roof creates certain problems in the selection of furniture for the attic. But the inclined wall can always place your bed, bedside tables, cabinets, tables and shelves. If the height in the lowest part of your room up to a meter and a half, you can set and wardrobe. But also overload the interior attic not advice as such premises requires space.

Share and Enjoy

  • Facebook
  • Twitter
  • Delicious
  • LinkedIn
  • StumbleUpon
  • Add to favorites
  • Email
  • RSS
Posted in Home Improvement, Home Services.

12 Cool Tips to Save Money on Pool Maintenance

There’s nothing better than having a pool on your backyard. Being able to just put on shorts or a bikini and enjoy sometime swimming on you own pool is a fantastic feeling.

However, not everyone can afford a $20,000 swimming pool, it’s just not feasible for some people. And even for people that can afford it, the initial investment isn’t only money that you’ll spend on your pool. Maintaining the pool is also expensive. There are machinery that require maintenance and repair, the water has to be treated, you usually have to hire a pool cleaning company, and it all adds up…

So we’ve put together a list of 12 tips that you can use to save some money on pool maintenance. Use these 12 and you’ll see yourself saving thousands of dollars in the long-run.

  1. Install a solar heating system.
  2. Install sunlight around your pool
  3. You should compare prices and services several contractors before choosing.
  4. See the latest products and ask if they can be profitable in the future.
  5. When choosing the lighting or the pool heater, make sure it works efficiently.
  6. You can use a pool cover to minimize evaporation and reduce heating costs.
  7. To save power, use the filtration system of your pool just in time other than peak.
  8. Keep the seasons in mind when using heating equipment in order to reach the conclusion that it is not necessary to use any heat source during the summer.
  9. If you are absent for more than a week, turn off the pool heater.
  10. If you use the pool only at weekends, reduce the setting of the thermostat and the heater settings in eight to ten degrees during the week.
  11. For maximum filtration and energy efficiency, clean the filter
  12. Save energy and time, buy a larger filter. A higher filter reduces the buildup of pressure, this saves the pool pump. Also will not have to clean the filter as often, thus saving valuable time.

These are our 12 tips that we use regularly to reduce the costs and expenses associated with having a swimming pool. We hope you enjoy them!

Share and Enjoy

  • Facebook
  • Twitter
  • Delicious
  • LinkedIn
  • StumbleUpon
  • Add to favorites
  • Email
  • RSS
Posted in Home Improvement, Home Services, Pool Building, Pools.

Should you go with a small or big firm for home renovations?

Special thanks to James from Granitestone Renovations for providing his inside with this article. Granitestone Renovation specializes in Basement Renovations in London, Ontario, Bathroom Renovations and Kitchen Renovations.

Small or big firms: Who provides the best in home improvement?

Do think that a skilled tradesman and the general contractor are different? Does is mean that the skilled workers in carpentry, plumbing, or electricity are inferior to a general contractor in the same fields? Well, the answer is that the difference between any skilled worker and a general contractor is that the latter is licensed.

Gets his license

Another approach to these questions is looking at that the general contractor as a skilled tradesman who addressed the question, “Why should I give the biggest portion of my pay to a general contractor yet I could be one?” He gets his license and bingo! The general contractor he becomes.

Started as tradesmen

Well, perhaps there is more to this than just getting a license, but the indisputable fact is that almost all general contractors started as tradesmen or tradeswomen, and then at one time they felt that they wanted to manage their own businesses.

Hiring-a-tradesman

Project managers

In big construction firms, there are project managers who deal with daily details of various projects. Project managers might or might not be tradesmen but normally do have some skills in business management. A big firm must manage several projects simultaneously in order to meet their expenses.

General contractors who have come up as tradesmen perhaps get one or two projects running at any particular time.

What do such differences imply to you as a property owner? Well, you might be just wondering with no clear picture in your mind.

Great gap

Depending on your personal preferences, the scope and size of your budget and improvement project, the gap between buying the services of a small firm (fundamentally a licensed tradesman cum general contractor) and a bigger construction firm can be great.

Each firm has its own advantages as well as disadvantages.

Have larger capacity

As a rule, bigger firms have larger capacity. They perhaps have skilled workers in all fields on salary. Consequently, when it comes to a given phase of construction or project, such a phase is perhaps going to start and end as scheduled or closer to the schedule.

Smaller companies, on the other hand, who may have a good reputation for performing well usually, have at least one or two salaried tradesmen who are available even at the shortest notice.

Are smaller firms with their small overhead likely to offer lower prices?

Although bigger firms sometimes do have more control on labor costs and materials pricing, generally, it is more likely for a tradesman to offer their services at lower charges, particularly in hard economic times.

The main point is that every time you are planning to have a home improvement project or construction, and you start your search for contractors, meet both small and large companies. Have your needs in mind, contact several prospective companies, small and large, and weigh what is right for you.

Share and Enjoy

  • Facebook
  • Twitter
  • Delicious
  • LinkedIn
  • StumbleUpon
  • Add to favorites
  • Email
  • RSS
Posted in Home Improvement, Home Services.

You Need Roof Cleaning Today

How much time do you spend thinking about your roof? If you are like most people, you probably don’t think about it very often. In fact, it might only be when you get a glimpse of the roof while chasing down an errant kite or Frisbee for the kids that you even realize just how dirty the roof is. Your roof can become a harbor for many different types of grime, gunk, and slime that can damage the appearance and the integrity of the roof. Let’s look at some of the different things that can grow on your roof.

Lichens, Moss, Algae, and the Accumulation of Dirt

Lichens have the potential to destroy shingles, and you can’t remove them manually without damaging your roof. Moss can grow on your roof as well, and since moss can hold water, it can cause serious damage to the roof. Again, this is something you should not try to remove manually. Algae can be a problem in many places as well. The algae can leave noticeable dark stains on the roof that ruin your home’s beauty and could make potential buyer’s turn away from your home before they give it a chance. Dirt build-up and even rust stains can affect the appearance of your roof too. It is important to have a clean roof so your home offers the beautiful appearance and curb appeal you know it has.

Why Clean Your Roof?

Roof cleaning is an effective way to take care of all of the problems mentioned above. It is a fast and convenient way to renew the look of your roof. People in the neighborhood will be happier that you have a clean roof, and you will as well. Your home is a major investment and a huge source of pride, so it makes sense that you would want to keep it looking as nice as possible. This is true whether you plan to sell your property or you simply want to improve the curb appeal for yourself. In some areas, insurance carriers require a clean roof before issuing or renewing home insurance policies.

There is also the potential for mold growth. As many already know, mold can cause health risks for people and for pets. Removing the mold, and all of the other elements growing on the roof, is essential for a happy, healthy, and beautiful property.

Roof Cleaning can do more than just make the home look better. It can also help to improve the life span of your roof. Best of all, you do not have to do it on your own. In fact, trying to clean your roof on your own would be a losing prospect for most people, simply because they do not have the tools or the knowledge to do it the right way. Instead, it makes much more sense to speak with a professional about setting up an appointment for the roof cleaning.

roof repair

The roof cleaning professionals at ACleanerChoice.Com will let you know more information for roof cleaning, the different methods, what’s growing on your roof, the cleaning process, preventive treatment and other services available.

Share and Enjoy

  • Facebook
  • Twitter
  • Delicious
  • LinkedIn
  • StumbleUpon
  • Add to favorites
  • Email
  • RSS
Posted in Home Services.

Reasons to Choose Granite Countertops Los Angeles

When you plan on having your house customized or renovate, there are special places that you want to enhance the design or style such as your countertop. You do not have to settle with the standard type. Instead, you should pursue popular materials that are used for countertops such as the granite countertops in Los Angeles. More households are now opting for granite countertops because they come with a lot of benefits. Read on below to find them out.

Granite countertop in Los Angeles is a material that is formed into a slab that is literally rock-hard. Granite’s hardness is next to diamond when it comes to the quality of natural materials. When the granite is properly installed, the granite countertop will last longer, probably forever and will be the only countertop you will have for your lifetime, and may even be passed on to the next generation. There are times when you need to change them, but the only reason you change them is when you find there is a need to. Granite is able to resist cracking, scratching and chipping. Due to the granite’s hardness, they are also highly resistant against heat. There are also households that no longer need to have chopping boards because they convert their granite countertops as one. But it is not a perfect material – it will manage to get chipped in the long time. Damages like these, however, are easy to fix, but it depends on how severe the damage is. You will be reminded by contractors or experts never to put hot tray or pan directly on top of the granite slab, but relatively such ways will not damage it.

Another valuable thing to a granite countertop Los Angeles is that maintenance is not too difficult at all. But in order for these countertops to be easy to maintain, it needs to be properly installed, including proper sealing. If it is sealed according to the instructions defined by the manufacturer, the granite countertop will be able to resist bacteria and staining. Sealing can also be done by yourself, if you wish to, but you will need to see how proper sealing should be done. All the cleaning needs is using soap and water, but you can also buy a cleaner product that is designed specifically for granite countertops. Even when you spill a glass of juice all over it, it will never leave a stain and will always look new for many decades.

 daily-protection-how-to-maintain-granite-countertops

Aside from its toughness against getting damaged and stained, one of the many reasons why people opt for granite countertops in Los Angeles is because of value. When you think of renovating your house and you wish to increase its value, try changing your countertop to granite and it will increase its value for as high as a hundred percent. They are potentially very good material for investment should you wish to have your house get a higher value. Also, granite material is considered a long-term investment as it is claimed to last almost all of your lifetime, and even the next.

Share and Enjoy

  • Facebook
  • Twitter
  • Delicious
  • LinkedIn
  • StumbleUpon
  • Add to favorites
  • Email
  • RSS
Posted in Home Services.

Professional Electrician Services in Gold Coast, Australia

Do you live in the Gold Coast area in Australia? We are all surrounded by electrical systems in our places of work and homes and it goes without argument that safety is very important. Most people can repair small home or office appliances and electrical wire faults among other things like painting the walls or repairing wooden floors but only properly insured and qualified electricians should be engaged when professional electrical services are needed to guarantee protection. There are numerous situations where the services of an expert gold coast electrician may come in handy but some of the most obvious are listed below.

Old Homes

This is to all occupants of a building over 25 years old, get an electrician ASAP! Why? Most of the electrical systems installed in more recent buildings follow a current standardized safety and quality building and housing set of codes therefore immediate repairs or upgrades are in order. Electrical systems where cables are insulated using cloth are dangerous according to recent electrification policies because they are more prone to accidental fires in case of faults that produce sparks. Most of the power outlets and circuits from this period are not compatible with three-pin plugs and hence not grounded as well time related damage through decay.

Protecting Wet Areas

Water is a very good conductor of electricity therefore wet areas such as bathrooms and kitchens pose a great danger when not properly protected. Leaks in plumbing lines can lead to more serious situations that may result in great losses or even death. Using power outlets in these areas of your home requires a sufficient installation of policy compliant GFCIs (Ground Fault Circuit Interrupters). All buildings that came up before 1987 need this upgrade that can save lives by completely shutting off electricity in cases where electric appliances accidentally fall in water filled tubs such as small radios, portable CD players or hair dryers. Other wet areas may include electrical circuits passing through, near or for a Jacuzzi, swimming pool and the front yard where sprinklers and hose pipes are used regularly.

Overloaded Power Outlet Points

An incredible electricity demand is created every time there is an overload either on power boards or power points. This causes the electrical system to overwork while trying maintaining sufficient power output for all connected appliances. This overloading may lead to careless running of electrical wires along the skirting and or extension power socket cords under the rug. This presents opportunities for accidents such as tripping on the wires or stepping on naked wires! The services of the best gold coast electrician is needed here to add more power outlets for your convenience and capacity safety.

Warm Power Outlets and Switches

If the surfaces of any power point in your building feel warm when you touch them something is burning! Call a professional electrician to conduct proper inspection and necessary repairs. Some of the outlets may even give electric shocks and this is cause for alarm. The wiring problem causing such issues should be looked into by an electrician because the problem could be as a result of a chain of faults only traceable by an expert like for example if an electric wire behind a dry wall needs fixing.

Regular Power Trips

Faulty circuits can also lead to regular power surges that may bring about blown fuses, tripping circuit breakers and flickering of lights. It is annoying when you keep getting blackouts or dimming lights every time your air conditioner or refrigerator is turned on! Some of these problems develop gradually and may go unnoticed for a while. Professional electrical engineering may be required when solving an issue related to these examples because repairs may include installation of a dedicated power line or adding a circuit thus calling the most qualified gold coast electrician in such cases is very much advised.

Please Note: Electricity can KILL YOU! Let the experts deal with it.

Share and Enjoy

  • Facebook
  • Twitter
  • Delicious
  • LinkedIn
  • StumbleUpon
  • Add to favorites
  • Email
  • RSS
Posted in Home Services.